DEM analysis on size segregation in feed bed of sintering machine

Masanori Nakano, Tsukasa Abe, Junya Kano, Kazuya Kunitomo

Research output: Contribution to journalArticlepeer-review

18 Citations (Scopus)

Abstract

Discrete element method (DEM) was applied to charging process in iron ore sintering and vertical size segregation in the feed bed was anlyized, where a particular charactor of sintering feed, plastisity and stikiness, was expressed by adjusting the rolling friction coefficient to fit a result from a preliminary test on sintering feed flowing out of a box. DEM simulations and comparison with plant data gave the following findings: 1) When the rolling coefficient was 4.0, the calculation resembled the experiment in terms of the angle and the spread of feed after resting. 2) The simulation for a charging apparatus recreated vertical size segregation in feed bed in good agreement with plant data. 3) The simulation showed that the size segregation increased with decreasing chute angle, the change of which was explained with the fact that the horizontal velosity of particle at the bottom end of the chute also increased unless the feed made a build-up on the chute.

Original languageEnglish
Pages (from-to)1559-1564
Number of pages6
JournalIsij International
Volume52
Issue number9
DOIs
Publication statusPublished - 2012

Keywords

  • Agglomeration
  • Charging
  • DEM
  • Discrete element method
  • Sintering
  • Size segregation

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'DEM analysis on size segregation in feed bed of sintering machine'. Together they form a unique fingerprint.

Cite this