Deformation microstructure and tensile strength of cold rolled pearlitic steel sheets

S. Tagashira, K. Sakai, T. Furuhara, T. Maki

Research output: Contribution to journalArticle

64 Citations (Scopus)

Abstract

The deformation microstructure produced by heavy cold rolling (from 70% to 95% reduction) of pearlitic structure with various amounts of rolling and the tensile strength of the cold rolled sheets were studied in the plain carbon steels with various carbon contents (0.6, 0.76, and 1.0 mass%C). The deformation microstructure was classified into the following three types; 1) Irregularly Bent Lamella (IBL): lamellae originally inclined with large angles to the rolling plane and irregularly bent after deformation, 2) Coarse Lamella with Shear band (CLS): the rhomboidal blocks of weakly deformed lamellae bounded by shear band, 3) Fine Lamella (FL): heavily deformed lamellae aligned parallel to the rolling direction with fine interlamellar spacings. As rolling reduction increases, the proportion of FL increases. The tensile strength of cold rolled specimens increases with rolling reduction. Work hardening with respect to true strain by cold rolling is similar to that obtained by wire drawing. After 92% cold roiling of 1.0 mass%C steel, the tensile strength over 2 500 MPa was achieved.

Original languageEnglish
Pages (from-to)1149-1155
Number of pages7
JournalIsij International
Volume40
Issue number11
DOIs
Publication statusPublished - 2000

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Deformation microstructure and tensile strength of cold rolled pearlitic steel sheets'. Together they form a unique fingerprint.

  • Cite this