Cyclic properties of protium absorption-desorption in Ti-Cr-V alloys

Koji Shirasaki; Takuya Tamura; Takahiro Kuriiwa; Takayuki Goto; Atsunori Kamegawa; Hitoshi Takamura; Masuo Okada

doi:10.2320/matertrans.43.1115

Cyclic properties of protium absorption-desorption in Ti-Cr-V alloys

Koji Shirasaki, Takuya Tamura, Takahiro Kuriiwa, Takayuki Goto, Atsunori Kamegawa, Hitoshi Takamura, Masuo Okada

ENG - Materials Science

Research output: Contribution to journal › Article › peer-review

32 Citations (Scopus)

Abstract

The cyclic properties of protium storage in Ti-Cr-V alloys with a BCC structure were investigated in order to develop the alloys with good cyclic properties. It was found that the hysteresis factor of pure V was almost unchanged but the hysteresis factor of Ti-Cr-V heat-treated alloys decreased with increasing cycle number. The plateau pressure of Ti-Cr-V heat-treated alloy in absorbing process dropped significantly with increasing cycle number up to the 20th cycle. In contrast to this, there was not any change in PCT curves of pure V metal. This could be originated from the difference in mechanical properties between V metal and Ti-Cr-V alloys.

Original language	English
Pages (from-to)	1115-1119
Number of pages	5
Journal	Materials Transactions
Volume	43
Issue number	5
DOIs	https://doi.org/10.2320/matertrans.43.1115
Publication status	Published - 2002 May

Keywords

Body centered cubic phase
Cyclic properties
Protium absorption-desorption
Protium storage alloy

ASJC Scopus subject areas

Materials Science(all)
Condensed Matter Physics
Mechanics of Materials
Mechanical Engineering

Access to Document

10.2320/matertrans.43.1115

Cite this

@article{517e72cad7d74af4b59d324e160dede3,

title = "Cyclic properties of protium absorption-desorption in Ti-Cr-V alloys",

abstract = "The cyclic properties of protium storage in Ti-Cr-V alloys with a BCC structure were investigated in order to develop the alloys with good cyclic properties. It was found that the hysteresis factor of pure V was almost unchanged but the hysteresis factor of Ti-Cr-V heat-treated alloys decreased with increasing cycle number. The plateau pressure of Ti-Cr-V heat-treated alloy in absorbing process dropped significantly with increasing cycle number up to the 20th cycle. In contrast to this, there was not any change in PCT curves of pure V metal. This could be originated from the difference in mechanical properties between V metal and Ti-Cr-V alloys.",

keywords = "Body centered cubic phase, Cyclic properties, Protium absorption-desorption, Protium storage alloy",

author = "Koji Shirasaki and Takuya Tamura and Takahiro Kuriiwa and Takayuki Goto and Atsunori Kamegawa and Hitoshi Takamura and Masuo Okada",

year = "2002",

month = may,

doi = "10.2320/matertrans.43.1115",

language = "English",

volume = "43",

pages = "1115--1119",

journal = "Materials Transactions",

issn = "1345-9678",

publisher = "Japan Institute of Metals (JIM)",

number = "5",

}

TY - JOUR

T1 - Cyclic properties of protium absorption-desorption in Ti-Cr-V alloys

AU - Shirasaki, Koji

AU - Tamura, Takuya

AU - Kuriiwa, Takahiro

AU - Goto, Takayuki

AU - Kamegawa, Atsunori

AU - Takamura, Hitoshi

AU - Okada, Masuo

PY - 2002/5

Y1 - 2002/5

N2 - The cyclic properties of protium storage in Ti-Cr-V alloys with a BCC structure were investigated in order to develop the alloys with good cyclic properties. It was found that the hysteresis factor of pure V was almost unchanged but the hysteresis factor of Ti-Cr-V heat-treated alloys decreased with increasing cycle number. The plateau pressure of Ti-Cr-V heat-treated alloy in absorbing process dropped significantly with increasing cycle number up to the 20th cycle. In contrast to this, there was not any change in PCT curves of pure V metal. This could be originated from the difference in mechanical properties between V metal and Ti-Cr-V alloys.

AB - The cyclic properties of protium storage in Ti-Cr-V alloys with a BCC structure were investigated in order to develop the alloys with good cyclic properties. It was found that the hysteresis factor of pure V was almost unchanged but the hysteresis factor of Ti-Cr-V heat-treated alloys decreased with increasing cycle number. The plateau pressure of Ti-Cr-V heat-treated alloy in absorbing process dropped significantly with increasing cycle number up to the 20th cycle. In contrast to this, there was not any change in PCT curves of pure V metal. This could be originated from the difference in mechanical properties between V metal and Ti-Cr-V alloys.

KW - Body centered cubic phase

KW - Cyclic properties

KW - Protium absorption-desorption

KW - Protium storage alloy

UR - http://www.scopus.com/inward/record.url?scp=0036577432&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036577432&partnerID=8YFLogxK

U2 - 10.2320/matertrans.43.1115

DO - 10.2320/matertrans.43.1115

M3 - Article

AN - SCOPUS:0036577432

VL - 43

SP - 1115

EP - 1119

JO - Materials Transactions

JF - Materials Transactions

SN - 1345-9678

IS - 5

ER -

Cyclic properties of protium absorption-desorption in Ti-Cr-V alloys

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this