Current status of ductile tungsten alloy development by mechanical alloying

Y. Ishijima, H. Kurishita, K. Yubuta, H. Arakawa, M. Hasegawa, Y. Hiraoka, T. Takida, K. Takebe

Research output: Contribution to journalConference articlepeer-review

37 Citations (Scopus)

Abstract

There were considerable differences in ductility and recrystallization temperatures among fine-grained, carbide-dispersed tungsten alloys developed so far by mechanical alloying, followed by sintering and hot working. The differences are attributable mainly to three microstructural factors giving detrimental effects on the ductility and recrystallization temperature; (1) precipitation of the brittle W2C phase, (2) heterogeneity in grain size and particle distributions and (3) loss of carbon which is a constituent of transition metal carbides. Therefore, a process to eliminate these factors is presented. The improved process was applied to fabricate tungsten alloys, and microstructural observation and three-point bending tests were performed on the alloys. It is demonstrated that the developed alloys have microstructures almost free from the three factors; the developed alloys exhibited no ductility before fracture in the as-HIPed state, but showed appreciable ductility in the as-forged state, indicating importance of plastic working to improve the ductility of the alloys.

Original languageEnglish
Pages (from-to)775-779
Number of pages5
JournalJournal of Nuclear Materials
Volume329-333
Issue number1-3 PART A
DOIs
Publication statusPublished - 2004 Aug 1
EventProceedings of the 11th Conference on Fusion Research - Kyoto, Japan
Duration: 2003 Dec 72003 Dec 12

ASJC Scopus subject areas

  • Nuclear and High Energy Physics
  • Materials Science(all)
  • Nuclear Energy and Engineering

Fingerprint Dive into the research topics of 'Current status of ductile tungsten alloy development by mechanical alloying'. Together they form a unique fingerprint.

Cite this