Crystallography of Platelet-Type Hematite Particles by Electron Microscopy

Daisuke Shindo, Byong Taek Lee, Yoshio Waseda, Atsushi Muramatsu, Tadao Sugimoto

Research output: Contribution to journalArticle

23 Citations (Scopus)

Abstract

Morphology of platelet-type hematite particles (α-Fe 2 O 3 ) produced by the gel-sol method was investigated by both scanning electron microscopy and transmission electron microscopy. In order to determine the orientation of crystal surfaces and make clear structural defects inside the particles, thin samples for transmission electron microscopy were prepared by using an ultra-microtome. The platelet-type particles were found to be single crystals with thickness about 0.2 μm, and most of the particles were bound by {0001} basal planes and {0112} side planes. These results were obtained from the experimental condition of the incident electron beam being parallel to both basal planes and side planes of the sliced samples, which was confirmed by sharpness of the contrast of crystal edges at low magnification and also the homogeneous contrast of lattice images near the crystal edges at high magnification. Furthermore, it was disclosed that some of the particles contained stacking faults on {0001} planes and/or twins.

Original languageEnglish
Pages (from-to)580-585
Number of pages6
JournalMaterials Transactions, JIM
Volume34
Issue number7
DOIs
Publication statusPublished - 1993 Jan 1

Keywords

  • gel-sol method
  • hematite
  • high-resolution electron microscopy
  • platelet-type hematite
  • ultra-microtome

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Crystallography of Platelet-Type Hematite Particles by Electron Microscopy'. Together they form a unique fingerprint.

  • Cite this