Corrosion and its mechanism of Al-10% Si alloy-coated steel in methanol containing H2O, NaCl, and HCOOH

Rie Umebayashi, Noboru Akao, Nobuyoshi Hara, Katsuhisa Sugimoto

Research output: Contribution to journalArticlepeer-review

9 Citations (Scopus)

Abstract

Corrosion behavior and mechanism of Al-10% Si alloy-coated steel produced by a melt-dipping method have been investigated in methanol containing H2O, NaCl, and HCOOH as contaminants. Immersion corrosion tests were performed in deaerated or aerated methanol with and without 0.1-30% H2O, 0.1% NaCl, and 0.1% HCOOH, and ex situ surface analysis and observation were made using an electron probe microanalyzer, X-ray photoelectron spectroscopy, optical microscopy, and scanning electron microscopy. The corrosion rate of the coated steel was negligibly small in methanol containing 0.1-30% H2O. However, in methanol containing 0.1-30% H2O with 0.1% NaCl or 0.1% HCOOH, the corrosion rate increased sharply at 0.1% H2O. From the surface analysis and observation after the tests, the corrosion in methanol containing 0.1% H2O with 0.1% NaCl proceeds on Al components in dendrites and eutectic structures of the coating layer. Al components corrode forming methoxide while the Si components in eutectic structures remain as metallic Si. In methanol containing 1-30% H2O, the surface of the coating layer was covered by oxide films composed of SiO2-Al2O3-Al(OH)3, which prevents corrosion.

Original languageEnglish
JournalJournal of the Electrochemical Society
Volume149
Issue number3
DOIs
Publication statusPublished - 2002 Mar 1

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Surfaces, Coatings and Films
  • Electrochemistry
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Corrosion and its mechanism of Al-10% Si alloy-coated steel in methanol containing H<sub>2</sub>O, NaCl, and HCOOH'. Together they form a unique fingerprint.

Cite this