Copper Distribution between Molten FeS-NaS0.5 Flux and Carbon Saturated Iron Melt

Chao Wang, Tetsuya Nagasaka, Mitsutaka Hiimo, Shiro Ban-Ya

Research output: Contribution to journalArticlepeer-review

49 Citations (Scopus)

Abstract

Copper distribution between FeS-NaS0.5 flux and carbon saturated liquid iron has been studied at 1 673 K. Copper distribution ratio, L.Cu = (mass%Cu),flUX/[mass%Cu]iron, was about 9 when FeS only was used as sulfide flux. The addition of NaS0.5 to FeS increased the copper distribution ratio. The L.Cu showed the maximum value of about 24, at around XNaSo.5 = 0.4, and became nearly constant at the range of higher NaSo.5 content than 0.4 of NaS0.5., The addition of NaS0.s also lowered sulfur content in liquid iron from 1.9 mass% at XNaSo.5 = 0 to 0.04 mass% at XNaSo.5 = 0.8. CuS0.5 dissolved in flux decreased LCu at high concentration range of NaS0.5. In order to discuss the effect of NaS0.5 and CuS0.5 on the copper distribution ratio, the activity coefficient of CuSo.5 in flux was evaluated. It was found that NaS0.5 decreased the activity coefficient of CuS0.5 in flux, so that the LCu increased in spite of the significant decrease of sulfur potential in the system by the addition of NaS0.5.

Original languageEnglish
Pages (from-to)1300-1308
Number of pages9
JournalIsij International
Volume31
Issue number11
DOIs
Publication statusPublished - 1991 Jan

Keywords

  • copper removal
  • flux
  • physical chemistry
  • recycling of steel scrap
  • refining
  • steelmaking
  • sulfide
  • tramp element

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Copper Distribution between Molten FeS-NaS0.5 Flux and Carbon Saturated Iron Melt'. Together they form a unique fingerprint.

Cite this