Contributions of 3D Printed Fracture Networks to Development of Flow and Transport Models

Anna Suzuki, James M. Minto, Noriaki Watanabe, Kewen Li, Roland N. Horne

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Conventional experiments using natural rock samples have trouble in observing rock structures and controlling fracture properties. Taking advantage of 3D printing technologies, a complex fracture network was made by using a 3D printer. This approach allowed us to control the properties of the fracture networks and to prepare identical geometries for both simulation and experiment. A tracer response curve from the flow experiment was obtained and compared with numerical simulations. The result of the computational fluid dynamics (CFD) simulation based on the Navier–Stokes equations was in good agreement with experimental result, which suggested that the results of experiment and the CFD simulation are reliable. On the other hand, comparison with an equivalent permeability model based on the cubic law showed a discrepancy from the experimental result. This validation approach enabled discussion of the limitation of the flow model. Because 3D printed fracture networks could reduce uncertainty between numerical simulation and laboratory experiment, they will be useful for understanding more detailed and more complicated phenomena in fracture networks.

Original languageEnglish
Pages (from-to)485-500
Number of pages16
JournalTransport in Porous Media
Volume129
Issue number2
DOIs
Publication statusPublished - 2019 Sep 15

Keywords

  • CFD
  • Equivalent permeability
  • Fracture network
  • Tracer experiment

ASJC Scopus subject areas

  • Catalysis
  • Chemical Engineering(all)

Fingerprint Dive into the research topics of 'Contributions of 3D Printed Fracture Networks to Development of Flow and Transport Models'. Together they form a unique fingerprint.

Cite this