Computer simulation of crack propagation path in microstructures at different stages of grain growth

Satoshi Kitaoka, Hideaki Matsubara, Hiroshi Kawamoto

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)

Abstract

A method of simulating crack propagation in single-phase polycrystals and two-phase composites containing dispersoids is proposed. The microstructures for simulation were generated by the Monte Carlo method using a two-dimensional triangular lattice. The criterion for crack path selection is based on the total released energy rate of the system on crack extension. The crack path is determined by selecting the neighboring lattice in front of the crack tip corresponding to the smallest released rate from five possible crack extension scenarios; cracking along the cleavage plane in a matrix grain, a non-cleavage plane in a matrix grain, along a grain boundary, dispersoid, or the interface between a matrix grain and dispersoid. The crack propagation behavior was analyzed by calculating the surface ratio of the transgranular fracture, crack length ratio and effective fracture energy. The crack paths depended significantly on the constitution of the simulated microstructures such as average matrix grain size, distribution of the dispersoids and ratios of the fracture surface formation energies.

Original languageEnglish
Pages (from-to)422-427
Number of pages6
JournalJournal of the Ceramic Society of Japan
Volume106
Issue number4
DOIs
Publication statusPublished - 1998 Apr
Externally publishedYes

Keywords

  • Composite
  • Crack
  • Fracture surface
  • Grain growth
  • Microstructure
  • Modeling
  • Simulation

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemistry(all)
  • Condensed Matter Physics
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Computer simulation of crack propagation path in microstructures at different stages of grain growth'. Together they form a unique fingerprint.

Cite this