Comparing the origin of ductility in the Zr-Al-Ni-Cu-M (M = Nb, Pd) metallic glasses

A. D. Setyawan, J. Saida, H. Kato, M. Matsushita, A. Inoue

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The origin of Zr65Al7.5Ni10Cu 12.5Pd5 and Zr65Al7.5Ni 10Cu12.5Nb5 glassy alloys exhibiting a remarkable plastic strain of about 6% and over 10%, respectively, under compressive deformation is compared. Observation by transmission electron microscopic (TEM) indicates that the deformation-induced structural transformation from monolithic glassy phase is responsible for the large plasticity. The degree of structural change, however, is different between both alloys: the fcc-Zr2Ni crystals emerged within glassy phase for the former, while only ordered clusters were observed for the latter. The difference is suggested to correlate to the slower grain-growth of the primary crystallization phase in the Zr65Al7.5Ni 10Cu12.5Nb5 compared to those in the Zr 65Al7.5Ni10Cu12.5Pd5 alloy.

Original languageEnglish
Pages (from-to)1884-1888
Number of pages5
JournalIntermetallics
Volume18
Issue number10
DOIs
Publication statusPublished - 2010 Oct

Keywords

  • B. Glasses, metallic
  • B. Mechanical properties at ambient temperature
  • C. Nanocrystals
  • D. Microstructure (as-cast, deformation-induced)

ASJC Scopus subject areas

  • Chemistry(all)
  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Comparing the origin of ductility in the Zr-Al-Ni-Cu-M (M = Nb, Pd) metallic glasses'. Together they form a unique fingerprint.

  • Cite this