Charge-induced high-performance actuation of borophene

Vuong V. Thanh, Nguyen D. Van, Do V. Truong, Nguyen T. Hung

Research output: Contribution to journalArticlepeer-review

Abstract

Borophene, a two-dimensional material, has grown fast in the nanomaterials field because of its unique electronic and mechanical properties. In this work, we demonstrate that the unique properties of borophene make this material with a high-performance electromechanical actuator by using first-principles calculations. We find a high Young's modulus about 376.55 N m-1 of a striped borophene, which is larger than that of graphene (∼336 N m-1) in the unit of N m-1. In addition, upon hole injection, maximum actuator strain is up to 1.67% that is over 7 times larger than that of graphene at the same value of hole doping (0.04 e/atom). Therefore, the striped borophene shows a high work-area-density per cycle of 22 MJ m-3•nm, it is approximately 28 and 11 times larger than that of graphene (0.78 MJ m-3•nm) and metallic 1T-MoS2 (2.05 MJ m-3•nm), respectively. Furthermore, the striped borophene still maintains the metal property under charge doping. Thus, an actuator device based on borophene can work under a low applied voltage. Finally, the charge doping effects on the mechanical strength of borophene are investigated. Interestingly, the mechanical strength is increased by 15.8% in the case of electron doping.

Original languageEnglish
Article number105504
JournalJournal of Physics D: Applied Physics
Volume54
Issue number10
DOIs
Publication statusPublished - 2020 Dec 23

Keywords

  • actuator material
  • artificial muscles
  • borophene
  • first-principle calculations

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Acoustics and Ultrasonics
  • Surfaces, Coatings and Films

Fingerprint Dive into the research topics of 'Charge-induced high-performance actuation of borophene'. Together they form a unique fingerprint.

Cite this