Characterization of grain boundary conductivity of spin-sprayed ferrites using scanning microwave microscope

J. Myers, T. Nicodemus, Y. Zhuang, T. Watanabe, N. Matsushita, Masahiro Yamaguchi

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

Grain boundary electrical conductivity of ferrite materials has been characterized using scanning microwave microscope. Structural, electrical, and magnetic properties of Fe 3 O 4 spin-sprayed thin films onto glass substrates for different length of growth times were investigated using a scanning microwave microscope, an atomic force microscope, a four-point probe measurement, and a made in house transmission line based magnetic permeameter. The real part of the magnetic permeability shows almost constant between 10 and 300MHz. As the Fe 3 O 4 film thickness increases, the grain size becomes larger, leading to a higher DC conductivity. However, the loss in the Fe 3 O 4 films at high frequency does not increase correspondingly. By measuring the reflection coefficient s 11 from the scanning microwave microscope, it turns out that the grain boundaries of the Fe 3 O 4 films exhibit higher electric conductivity than the grains, which contributes loss at radio frequencies. This result will provide guidance for further improvement of low loss ferrite materials for high frequency applications.

Original languageEnglish
Article number17A506
JournalJournal of Applied Physics
Volume115
Issue number17
DOIs
Publication statusPublished - 2014 May 7

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Characterization of grain boundary conductivity of spin-sprayed ferrites using scanning microwave microscope'. Together they form a unique fingerprint.

Cite this