Characteristics of solid flow and stress distribution including asymmetric phenomena in blast furnace analyzed by discrete element method

Shungo Natsui, Shigeru Ueda, F. A.N. Zhengyun, Nils Andersson, Junya Kano, Ryo Inoue, Tatsuro Ariyama

Research output: Contribution to journalArticle

32 Citations (Scopus)

Abstract

Since the solid flow in blast furnace is composed of each particle motion, the discontinuous phenomena of burden descending can be occasionally observed. Understanding of the solid flow is important for blast furnace operation. Discrete Element Method (DEM) can offer the behavior for each particle of burden in the furnace. Three dimensional analysis of solid motion containing the ununiform region became possible with using DEM. In the present study, a blast furnace of 2000 m3 inner volume with 16 tuyeres was taken as the object for the simulation. Firstly, the stream line of solid, velocity variation and stress field in blast furnace were simultaneously analyzed by using the characteristic of DEM on each particle movement. Especially, the transient behavior on velocity and stress distribution during charging and slipping were calculated. The fundamental characteristics of burden descending became clear. Secondly, this study has focused on the asymmetric phenomena in the blast furnace on the basis of the above results. In this calculation, number of active tuyere was intentionally varied. The stress network showed the remarkable change in this case. Moreover, it was found that many local slips between particles were distributed in the bosh and they concentrated on the region nearby the active raceway due to the weakened stress. The stress network is closely related the particle velocity distribution. The consumption rate of coke in the tuyere significantly affected on the circumferential uniformity. Totally, the discontinuous burden descending and the characteristic of particle movement were essentially understood.

Original languageEnglish
Pages (from-to)207-214
Number of pages8
JournalIsij International
Volume50
Issue number2
DOIs
Publication statusPublished - 2010 May 19

Keywords

  • Blast furnace
  • Discrete element method
  • Ironmaking
  • Mathematical model
  • Slip
  • Solid motion
  • Stress

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Characteristics of solid flow and stress distribution including asymmetric phenomena in blast furnace analyzed by discrete element method'. Together they form a unique fingerprint.

  • Cite this