Cavitation erosion characteristics of TiC reinforced metal matrix composite layer fabricated by plasma cladding

Y. P. Wu, J. F. Zhang, G. Y. Li, S. Hong, Z. H. He

    Research output: Contribution to journalArticlepeer-review

    4 Citations (Scopus)

    Abstract

    The present study focused on fabricating a novel metal matrix composite (MMC) layer with a good cavitation erosion resistance by plasma cladding of TiC/Ni60 powders on the matrix of austenitic stainless steel 1Cr18Ni9Ti. After the cladding process, the microstructures and the resistance to cavitation erosion of the MMC layer were investigated in comparison with the ZG06Cr13Ni5Mo martensite stainless steel. The MMC layer consisted of γ-Ni dendrite, interdendritic eutectic (γ-Ni austenite, M23C6, M7C3 and CrB) and TiC particles. With such hard carbides and borides, the MMC layer possessed a high microhardness (860 HV0?2), almost three times that of the matrix material ZG06Cr13Ni5Mo (260 HV0.2). The weight loss of the reference material ZG06Cr13Ni5Mo was greater than that of the MMC layer during the cavitation erosion process because of its lower microhardness. The microstructural observation indicated that the cavitation corrosion of the MMC layer initiated from the interface of γ-Ni matrix and TiC particles due to the weak bonding of these two phases. However, the cavitation erosion of ZG06Cr13Ni5Mo initiated from the lath interfaces of martensites and the grain boundaries.

    Original languageEnglish
    Pages (from-to)251-256
    Number of pages6
    JournalMaterials Technology
    Volume26
    Issue number5
    DOIs
    Publication statusPublished - 2011

    Keywords

    • Cavitation erosion
    • Hardfacing
    • Metal matrix composite
    • Microstructure
    • Plasma cladding

    ASJC Scopus subject areas

    • Materials Science(all)
    • Condensed Matter Physics
    • Mechanics of Materials
    • Mechanical Engineering

    Fingerprint

    Dive into the research topics of 'Cavitation erosion characteristics of TiC reinforced metal matrix composite layer fabricated by plasma cladding'. Together they form a unique fingerprint.

    Cite this