TY - JOUR

T1 - Calphad modeling of LRO and SRO using AB initio data

AU - Enoki, Masanori

AU - Sundman, Bo

AU - Sluiter, Marcel H.F.

AU - Selleby, Malin

AU - Ohtani, Hiroshi

N1 - Funding Information:
Funding: H.O. gratefully acknowledges the financial support by JSPS KAKENHI (grant number, 16H02387) and M.S. acknowledges funding from the Competence Center Hero-m 2i.

PY - 2020/8

Y1 - 2020/8

N2 - Results from DFT calculations are in many cases equivalent to experimental data. They describe a set of properties of a phase at a well-defined composition and temperature, T, most often at 0 K. In order to be practically useful in materials design, such data must be fitted to a thermodynamic model for the phase to allow interpolations and extrapolations. The intention of this paper is to give a summary of the state of the art by using the Calphad technique to model thermodynamic properties and calculate phase diagrams, including some models that should be avoided. Calphad models can decribe long range ordering (LRO) using sublattices and there are model parameters that can approximate short range ordering (SRO) within the experimental uncertainty. In addition to the DFT data, there is a need for experimental data, in particular, for the phase diagram, to determine the model parameters. Very small differences in Gibbs energy of the phases, far smaller than the uncertainties in the DFT calculations, determine the set of stable phases at varying composition and T. Thus, adjustment of the DFT results is often needed in order to obtain the correct set of stable phases.

AB - Results from DFT calculations are in many cases equivalent to experimental data. They describe a set of properties of a phase at a well-defined composition and temperature, T, most often at 0 K. In order to be practically useful in materials design, such data must be fitted to a thermodynamic model for the phase to allow interpolations and extrapolations. The intention of this paper is to give a summary of the state of the art by using the Calphad technique to model thermodynamic properties and calculate phase diagrams, including some models that should be avoided. Calphad models can decribe long range ordering (LRO) using sublattices and there are model parameters that can approximate short range ordering (SRO) within the experimental uncertainty. In addition to the DFT data, there is a need for experimental data, in particular, for the phase diagram, to determine the model parameters. Very small differences in Gibbs energy of the phases, far smaller than the uncertainties in the DFT calculations, determine the set of stable phases at varying composition and T. Thus, adjustment of the DFT results is often needed in order to obtain the correct set of stable phases.

KW - Calphad

KW - DFT

KW - Phase diagrams

KW - Thermodynamic models

UR - http://www.scopus.com/inward/record.url?scp=85088685554&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85088685554&partnerID=8YFLogxK

U2 - 10.3390/met10080998

DO - 10.3390/met10080998

M3 - Article

AN - SCOPUS:85088685554

VL - 10

SP - 1

EP - 31

JO - Metals

JF - Metals

SN - 2075-4701

IS - 8

M1 - 998

ER -