Boundary-layer transition detection in a cryogenic wind tunnel using luminescent paint

Keisuke Asai, Hiroshi Kanda, Tetsuya Kunimasu, Tianshu Liu, John P. Sullivan

Research output: Contribution to journalArticle

42 Citations (Scopus)

Abstract

A technique for boundary-layer transition detection in a cryogenic wind tunnel has been developed. This technique is based on the thermal quenching of luminescent molecules. Calibration results show that luminescence of the paint composed of ruthenium complex and silicone polymer is strongly sensitive to temperatures over the range of 90-220 K. This capability allows one to visualize thermal signatures across the boundary-layer transition. A thin paint coating has been applied on three airfoil models with different thermal insulation properties. The paint was excited by a xenon light and the luminescence image was acquired using a high-resolution digital camera. To enhance the surface temperature signatures between laminar and turbulent regions, either the flow or the model substrate was cooled or heated in an active manner. Transition patterns have been successfully visualized by processing the luminescent images. Boundary-layer transition has been detected by using this technique over a cryogenic temperature range of 90-150 K in subsonic and transonic flows.

Original languageEnglish
Pages (from-to)34-42
Number of pages9
JournalJournal of Aircraft
Volume34
Issue number1
DOIs
Publication statusPublished - 1997
Externally publishedYes

ASJC Scopus subject areas

  • Aerospace Engineering

Fingerprint Dive into the research topics of 'Boundary-layer transition detection in a cryogenic wind tunnel using luminescent paint'. Together they form a unique fingerprint.

  • Cite this