Behavior of fluorine dissolution from hot metal pretreatment slag

Hideaki Suito; Ryo Inoue

doi:10.2355/tetsutohagane1955.88.6_340

Behavior of fluorine dissolution from hot metal pretreatment slag

Hideaki Suito, Ryo Inoue

Institute of Multidisciplinary Research for Advanced Materials (IMRAM)

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

Abstract

Based on the results for the time dependence of F, Ca, Si and Al amount dissolved from hot metal pretreatment slags, the behavior of fluorine dissolution has been examined. It was found that the amount of fluorine dissolved from hot metal pretreatment slag depends on CaO/SiO₂ mass ratio and fluorine content in slag. This trend is obvious in the case of synthetic slags. Fluorine ion in solution is incorporated into CaO-SiO₂-H₂O and CaO-SiO₂-Al₂O₃-H₂O gels during the formation of these gels. Therefore, it was found difficult to estimate the amount of fluorine in solution from the amount of F-containing mineral phases and slag compositions.

Original language	English
Pages (from-to)	340-346
Number of pages	7
Journal	Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume	88
Issue number	6
DOIs	https://doi.org/10.2355/tetsutohagane1955.88.6_340
Publication status	Published - 2002 Jun

Keywords

Fluorine
Fluorine content
Hot metal pretreatment slag
Slag basicity
Synthetic slag

ASJC Scopus subject areas

Condensed Matter Physics
Physical and Theoretical Chemistry
Metals and Alloys
Materials Chemistry

Access to Document

10.2355/tetsutohagane1955.88.6_340

Cite this

@article{57bad6ab6d7242ec98dcdd621e00b70c,

title = "Behavior of fluorine dissolution from hot metal pretreatment slag",

abstract = "Based on the results for the time dependence of F, Ca, Si and Al amount dissolved from hot metal pretreatment slags, the behavior of fluorine dissolution has been examined. It was found that the amount of fluorine dissolved from hot metal pretreatment slag depends on CaO/SiO2 mass ratio and fluorine content in slag. This trend is obvious in the case of synthetic slags. Fluorine ion in solution is incorporated into CaO-SiO2-H2O and CaO-SiO2-Al2O3-H2O gels during the formation of these gels. Therefore, it was found difficult to estimate the amount of fluorine in solution from the amount of F-containing mineral phases and slag compositions.",

keywords = "Fluorine, Fluorine content, Hot metal pretreatment slag, Slag basicity, Synthetic slag",

author = "Hideaki Suito and Ryo Inoue",

year = "2002",

month = jun,

doi = "10.2355/tetsutohagane1955.88.6_340",

language = "English",

volume = "88",

pages = "340--346",

journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",

issn = "0021-1575",

publisher = "Iron and Steel Institute of Japan",

number = "6",

}

TY - JOUR

T1 - Behavior of fluorine dissolution from hot metal pretreatment slag

AU - Suito, Hideaki

AU - Inoue, Ryo

PY - 2002/6

Y1 - 2002/6

N2 - Based on the results for the time dependence of F, Ca, Si and Al amount dissolved from hot metal pretreatment slags, the behavior of fluorine dissolution has been examined. It was found that the amount of fluorine dissolved from hot metal pretreatment slag depends on CaO/SiO2 mass ratio and fluorine content in slag. This trend is obvious in the case of synthetic slags. Fluorine ion in solution is incorporated into CaO-SiO2-H2O and CaO-SiO2-Al2O3-H2O gels during the formation of these gels. Therefore, it was found difficult to estimate the amount of fluorine in solution from the amount of F-containing mineral phases and slag compositions.

AB - Based on the results for the time dependence of F, Ca, Si and Al amount dissolved from hot metal pretreatment slags, the behavior of fluorine dissolution has been examined. It was found that the amount of fluorine dissolved from hot metal pretreatment slag depends on CaO/SiO2 mass ratio and fluorine content in slag. This trend is obvious in the case of synthetic slags. Fluorine ion in solution is incorporated into CaO-SiO2-H2O and CaO-SiO2-Al2O3-H2O gels during the formation of these gels. Therefore, it was found difficult to estimate the amount of fluorine in solution from the amount of F-containing mineral phases and slag compositions.

KW - Fluorine

KW - Fluorine content

KW - Hot metal pretreatment slag

KW - Slag basicity

KW - Synthetic slag

UR - http://www.scopus.com/inward/record.url?scp=0036602334&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036602334&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane1955.88.6_340

DO - 10.2355/tetsutohagane1955.88.6_340

M3 - Article

AN - SCOPUS:0036602334

VL - 88

SP - 340

EP - 346

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

SN - 0021-1575

IS - 6

ER -

Behavior of fluorine dissolution from hot metal pretreatment slag

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this