Beam test of button-type beam position monitor for the ATF damping ring

F. Hinode, H. Hayano, M. Tejima, N. Terunuma, J. Urakawa

Research output: Contribution to conferencePaper

Abstract

The Button-type Beam Position Monitors (BPMs) were fabricated for the ATF damping ring. The BPM was designed to achieve the position resolution less than 5 μ m, and the fabrication of the first 40 BPMs was completed. For this BPM, a beam test was carried out at the 80 MeV injector part of the ATF LINAC. All of bunch signals in multi-bunch beam were clearly observed without any discharge. The calibration of BPMs was also performed to check their offset from the electrical center to the mechanical center and their position detection sensitivity. The result shows a good uniformity of position detection.

Original languageEnglish
Pages2604-2606
Number of pages3
Publication statusPublished - 1995 Dec 1
Externally publishedYes
EventProceedings of the 1995 16th Particle Accelerator Conference. Part 2 (of 5) - Dallas, TX, USA
Duration: 1995 May 11995 May 5

Other

OtherProceedings of the 1995 16th Particle Accelerator Conference. Part 2 (of 5)
CityDallas, TX, USA
Period95/5/195/5/5

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Beam test of button-type beam position monitor for the ATF damping ring'. Together they form a unique fingerprint.

  • Cite this

    Hinode, F., Hayano, H., Tejima, M., Terunuma, N., & Urakawa, J. (1995). Beam test of button-type beam position monitor for the ATF damping ring. 2604-2606. Paper presented at Proceedings of the 1995 16th Particle Accelerator Conference. Part 2 (of 5), Dallas, TX, USA, .