Balance characteristics studies using Wigner distribution analysis for SAW devices

Takashi Shiba, Tatsuhiko Ishizaki, Shinichiro Oosawa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The Common-mode rejection (CMR) parameter and the direct amplitude / phase unbalance value are used for evaluation of balance type SAW devices in order to compare the balance port impedance dependence. Time-domain analysis based on unbalanced scattering matrix elements and Wigner distribution based on CMR characteristics arc also proposed to apply to balance type SAW filters. Unbalanced responses of imbalanced filter (A) are observed at concentrated area for delay and frequency domain. It can be found that the unbalance origin of filter (A) is acoustical mode. A good agreement with time-domain response of each balanced port and a low Wigner CMR distribution are obtained for balanced filter (B). Unbalanced response of filter (B) with circuit asymmetry are observed at whole area corresponding to main signal. Consequently it is verified that these time-domain and Wigner distribution methods are effective for analyzing the origin of imbalance.

Original languageEnglish
Title of host publication2005 IEEE Ultrasonics Symposium
Pages1042-1047
Number of pages6
DOIs
Publication statusPublished - 2005 Dec 1
Externally publishedYes
Event2005 IEEE Ultrasonics Symposium - Rotterdam, Netherlands
Duration: 2005 Sep 182005 Sep 21

Publication series

NameProceedings - IEEE Ultrasonics Symposium
Volume2
ISSN (Print)1051-0117

Other

Other2005 IEEE Ultrasonics Symposium
CountryNetherlands
CityRotterdam
Period05/9/1805/9/21

ASJC Scopus subject areas

  • Acoustics and Ultrasonics

Fingerprint Dive into the research topics of 'Balance characteristics studies using Wigner distribution analysis for SAW devices'. Together they form a unique fingerprint.

Cite this