Abstract
A fully comprehensive electrical admittance matrix composition technique including the effects of residual electrical elements (capacitance, inductance and resistance) will be reported corresponding the various kind of the devices. An automatic design technique based on the optimization method is applied using the above composition routine. The automatic design procedure determines the parameters for SAW Filter elements and the external circuit element. It is possible that the procedure perform using measured admittance matrix elements. In order to verify the technique dual band filters and duplexers for digital mobile terminals were designed using the above procedure. The performance of these devices was found to be in good agreement with the design predictions.
Original language | English |
---|---|
Pages (from-to) | 165-170 |
Number of pages | 6 |
Journal | Proceedings of the IEEE Ultrasonics Symposium |
Volume | 1 |
Publication status | Published - 1997 Dec 1 |
Externally published | Yes |
Event | Proceedings of the 1997 IEEE Ultrasonics Symposium. Part 1 (of 2) - Toronto, Can Duration: 1997 Oct 5 → 1997 Oct 8 |
ASJC Scopus subject areas
- Acoustics and Ultrasonics