Atomic-layer etching of GaN by using an HBr neutral beam

Daisuke Ohori, Takahiro Sawada, Kenta Sugawara, Masaya Okada, Ken Nakata, Kazutaka Inoue, Daisuke Sato, Hideyuki Kurihara, Seiji Samukawa

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

In the gate-recess formation process, normally-off operation is achieved by removing the barrier layer by dry etching to reduce the two-dimensional-electron-gas concentration under the gate electrode. An atomic-layer defect-free etching of GaN is thus indispensable to achieve high-frequency, high-power, and normally-off operation. More-precise atomic-layer defect-free GaN etching was investigated by using an HBr neutral beam. This investigation found that the HBr neutral beam could achieve more-precise atomic-layer etching than the Cl2 neutral beam because the HBr chemistry can control the reactivity of atomic-layer etching by forming a thinner and less-volatile reaction layer.

Original languageEnglish
Article number032603
JournalJournal of Vacuum Science and Technology A: Vacuum, Surfaces and Films
Volume38
Issue number3
DOIs
Publication statusPublished - 2020 May 1

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films

Fingerprint Dive into the research topics of 'Atomic-layer etching of GaN by using an HBr neutral beam'. Together they form a unique fingerprint.

Cite this