Application of in-situ Raman scattering spectroscopy for stress condition measurement in solid oxide fuel cells

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

A feasible study for an in-situ stress evaluation method for solid oxide fuel cells based on Raman scattering spectroscopy was performed using two anode-supported cells with a cathode interlayer made from Samarium (Sm) doped ceria. Model cells with a dense cathode interlayer demonstrated a compressive stress of -100sMPa at room temperature, and the results were comparable to those from X-ray diffraction. Model cells with a porous interlayer showed complex stress conditions that deviated from in-plane stress due to their porosity, and the model cell was confirmed not to be suitable for this method. At high temperatures, compressive stress was found to decrease as temperature increased and was almost neutral at the operating temperatures of the fuel cell, with good replication. Hence, the feasibility of this method for model cells with a dense cathode interlayer was confirmed.

Original languageEnglish
Pages (from-to)213-217
Number of pages5
JournalJournal of the Ceramic Society of Japan
Volume125
Issue number4
DOIs
Publication statusPublished - 2017 Apr

Keywords

  • In-plane stress
  • Multilayered structure
  • Rare earth doped ceria
  • Thermal stress

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemistry(all)
  • Condensed Matter Physics
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Application of in-situ Raman scattering spectroscopy for stress condition measurement in solid oxide fuel cells'. Together they form a unique fingerprint.

Cite this