Annealing behavior of an ultrafine-grained Fe-Ni-Mn steel during isothermal aging

S. Hossein Nedjad, M. Nili Ahmadabadi, Tadashi Furuhara

Research output: Contribution to journalArticlepeer-review

4 Citations (Scopus)

Abstract

An ultrafine-grained maraging steel was fabricated by cold rolling and aging of iron-nickel-manganese lath martensite. Transmission electron microscopy was used to study precipitation behavior at grain boundaries during isothermal aging at 753 K. Relatively coarse precipitates were found at triple junctions of grain boundaries after aging for 0.36 ks. During further aging, precipitates coarsen at triple junctions at the expense of fine precipitates embedded at ultrafine grains. Mass-conservative dissolution of matrix precipitates occurs homogeneously as a result of which the precipitate-free zone around coarse particulates is eliminated. The phenomena of exclusive precipitation at grain boundary triple junctions and homogenous dissolution of matrix precipitates are attributed to the reduced length scale in the ultrafine-grained microstructure.

Original languageEnglish
Pages (from-to)156-159
Number of pages4
JournalMaterials Science and Engineering A
Volume503
Issue number1-2
DOIs
Publication statusPublished - 2009 Mar 15

Keywords

  • Coarsening
  • Grain boundary
  • Nanocrystalline
  • Precipitation
  • Triple junction

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Annealing behavior of an ultrafine-grained Fe-Ni-Mn steel during isothermal aging'. Together they form a unique fingerprint.

Cite this