Anisotropic in vitro vessel model using poly(vinyl alcohol) hydro gel and mesh material

Research output: Contribution to journalArticlepeer-review

9 Citations (Scopus)

Abstract

In the present study, the authors fabricated straight multilayer hybrid tubular in vitro vessel models (inner diameter Din 10 mm; thickness T = 4 mm) composed of poly(vinyl alcohol) hydrogel (PVA-H) and anisotropic mesh materials. The authors performed tensile, stress-relaxation and cyclic-tensile tests using axial and circumferential test pieces as well as pressure-diameter (P-D) tests using tubular test piece. In the tensile and stressrelaxation tests, the anisotropic and nonlinear mechanical properties and hysteresis characteristic of the in vitro models were confirmed. The in vitro models also showed behavior qualitatively similar to that of native arteries in cycle-tensile and P-D tests. These results demonstrate that the mechanical properties of native vessels can be duplicated in an in vitro model by controlling the components of the mesh material, the orientation of elastic fibers in the mesh material, and the concentration and thickness of PVA-H layers.

Original languageEnglish
Pages (from-to)2242-2250
Number of pages9
JournalJournal of Applied Polymer Science
Volume116
Issue number4
DOIs
Publication statusPublished - 2010 May 15

Keywords

  • Mechanical properties
  • Nonlinear polymers
  • Relaxation
  • Viscoelastic properties
  • Water-soluble polymers

ASJC Scopus subject areas

  • Chemistry(all)
  • Surfaces, Coatings and Films
  • Polymers and Plastics
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Anisotropic in vitro vessel model using poly(vinyl alcohol) hydro gel and mesh material'. Together they form a unique fingerprint.

Cite this