Abstract
In the project of Energy-saving ITS Technology of Japan, reliable automatic platooning by trucks is a main objective for highway transportation. The utilization of a driving simulator is useful to examine the safety of the automatic platooning by the Project. The driving simulator must be the same as an actual truck with software and hardware. Therefore, a new type of driving simulator was constructed to reproduce truck dynamics and control. A full-scale cabin of truck on a moving platform of six-degree-of-freedom was integrated into the driving simulator. To construct software architecture for automatic platooning, TruckSim as a general truck simulation software was embedded into Simulink, and a gap distance controller for longitudinal and lateral directions was designed. By the experiment using the driving simulator, on the assumption of system failure in forming automatic platooning of trucks from a manual drive or adaptive cruise control (ACC) to an automatic platooning of the truck, driver behaviors for the emergency avoidance in a following truck were studied.
Original language | English |
---|---|
Pages | AP-00325 |
Publication status | Published - 2012 |
Externally published | Yes |
Event | 19th Intelligent Transport Systems World Congress, ITS 2012 - Vienna, Austria Duration: 2012 Oct 22 → 2012 Oct 26 |
Other
Other | 19th Intelligent Transport Systems World Congress, ITS 2012 |
---|---|
Country/Territory | Austria |
City | Vienna |
Period | 12/10/22 → 12/10/26 |
Keywords
- Automatic platooning
- Driver behavior
- Driving simulator
- Maneuverability
- Truck dynamics
ASJC Scopus subject areas
- Computer Networks and Communications
- Computer Science Applications
- Control and Systems Engineering
- Electrical and Electronic Engineering
- Mechanical Engineering
- Transportation