Analysis of sliding wear mechanism in the contact between titled block and plate

T. Kato, K. Hokkirigawa, T. Fukuda, M. Shinooka, J. Takahashi

Research output: Contribution to journalArticle

Abstract

The aim of this research is to provide an explanation of the sliding wear mechanism in the tilted contact between a block and flat surface through experiment and logical analysis. For this purpose, the authors first used a CCD microscope tribosystem, and conducted sliding wear experiments modeling the tilt of an S 45 C block test piece with various types of metal plates (aluminum alloy, S 45 C) with base oil lubrication. As a result, they were able to classify the wear modes under tilted contact as 'cutting,' 'ploughing,' and 'plastic deformation of the block tip.' The authors also conducted a logical analysis of the regions in which these wear modes occur, and constructed a wear map using the attack angle and hardness ratio of both materials on the two axes with the dimensionless interfacial shear strength which expresses the degree of lubrication state as a parameter. It was confirmed that the region of wear mode occurrence observed in experiments nearly conformed with the wear map.

Original languageEnglish
Pages (from-to)715-726
Number of pages12
JournalJapanese Journal of Tribology
Volume42
Issue number6
Publication statusPublished - 1997 Dec 1
Externally publishedYes

Keywords

  • Friction
  • Sliding wear

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Surfaces, Coatings and Films
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Analysis of sliding wear mechanism in the contact between titled block and plate'. Together they form a unique fingerprint.

  • Cite this