All-solid-state micro lithium-ion batteries fabricated by using dry polymer electrolyte with micro-phase separation structure

Hiroyuki Nakano, Kaoru Dokko, Jun ichi Sugaya, Tomoyuki Yasukawa, Tomokazu Matsue, Kiyoshi Kanamura

Research output: Contribution to journalArticle

43 Citations (Scopus)

Abstract

Micro-batteries were fabricated by using BAB block copolymer as dry polymer electrolyte, which consisted of polyethylene oxide and polystyrene and had relatively high ionic conductivity at room temperature. The micro-batteries were fabricated by a sol-gel method combined with micro-injection system. Two types of micro-battery were fabricated. One consists of a single cell and another of 3-cells connected in series. LiMn2O4 and Li4/3Ti5/3O4 were used as active materials in positive and negative electrode, respectively. The micro-array batteries were operated at room temperature without any plasticizer in the polymer electrolyte. The operation voltages were 2.45 V and 7.40 V for a single cell and 3-cell array, respectively. The discharge capacities estimated from cyclic voltammetry measurements were 245 nA h for a single cell and 12.1 nA h for a 3-cell array, which corresponded to the energy densities of 8.48 μW h cm-2 and 4.54 μW h cm-2, respectively.

Original languageEnglish
Pages (from-to)2013-2017
Number of pages5
JournalElectrochemistry Communications
Volume9
Issue number8
DOIs
Publication statusPublished - 2007 Aug 1

Keywords

  • LiMnO
  • LiTiO
  • Lithium batteries
  • Micro-batteries
  • Polymer electrolyte
  • Sol-gel

ASJC Scopus subject areas

  • Electrochemistry

Fingerprint Dive into the research topics of 'All-solid-state micro lithium-ion batteries fabricated by using dry polymer electrolyte with micro-phase separation structure'. Together they form a unique fingerprint.

  • Cite this