Acid catalytic hydrothermal conversion of carbohydrate biomass into useful substances

Yusuke Takeuchi, Fangming Jin, Kazuyuki Tohji, Heiji Enomoto

Research output: Contribution to journalArticle

78 Citations (Scopus)

Abstract

Acidic hydrothermal degradation of glucose was examined in the presence of HCl, H2SO4, and H3PO4 with pH varying from 1.5 to 2.5 and reaction time varying from 1 to 10 min at 523 K, to investigate the effect of different acid catalysts and acid concentration on the production of 5-hydroxymethyl-2-furaldehyde (HMF) and levulinic acid from glucose. At lower acidities of pH 2.5, a considerably higher amount of HMF was produced. The increase in acid concentration accelerated the conversion of HMF to levulinic acid. The order for the production of HMF using the three acids is in the sequence of H3PO4 > H2SO4 > HCl. On the contrary, the order for production of levulinic acid follows HCl > H2SO4 > H3PO4. In the experimental conditions used in this study, the highest yield of levulinic acid is about 55%, which was obtained at pH 1.5 for 5 min in the case of HCl as an acid catalyst, and the total highest yields of HMF and levulinic acid are about 50%, which occurred at pH 2.0 for 5 min in the case of H3PO 4 as an acid catalyst.

Original languageEnglish
Pages (from-to)2472-2475
Number of pages4
JournalJournal of Materials Science
Volume43
Issue number7
DOIs
Publication statusPublished - 2008 Apr 1

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Acid catalytic hydrothermal conversion of carbohydrate biomass into useful substances'. Together they form a unique fingerprint.

  • Cite this