A thermoplastic gel electrolyte for stable quasi-solid-state dye-sensitized solar cells

Jihuai Wu, Sancun Hao, Zhang Lan, Jianming Lin, Miaoliang Huang, Yunfang Huang, Leqin Fang, Shu Yin, Tsugio Sato

Research output: Contribution to journalArticlepeer-review

195 Citations (Scopus)

Abstract

Dye-sensitized solar cells (DSSCs) are receiving considerable attention as low-cost alternatives to conventional solar cells. In DSSCs based on liquid electrolytes, a photoelectric efficiency of 11 % has been achieved, but potential problems in sealing the cells and the low long-term stability of these systems have impeded their practical use. Here, we present a thermoplastic gel electrolyte (TPGE) as an alternative to the liquid electrolytes used in DSSCs. The TPGE exhibits a thermoplastic character, high conductivity, long-term stability, and can be prepared by a simple and convenient protocol. The viscosity, conductivity, and phase state of the TPGE can be controlled by tuning the composition. Using 40 wt % poly(ethylene glycol) (PEG) as the polymeric host, 60 wt % propylene carbonate (PC) as the solvent, and 0.65 M KI and 0.065 M I2 as the ionic conductors, a TPGE with a conductivity of 2.61 mS cm-2 is prepared. Based on this TPGE, a DSSC is fabricated with an overall light-to-electrical-energy conversion efficiency of 7.22 % under 100 mW cm-2 irradiation. The present findings should accelerate the widespread use of DSSCs.

Original languageEnglish
Pages (from-to)2645-2652
Number of pages8
JournalAdvanced Functional Materials
Volume17
Issue number15
DOIs
Publication statusPublished - 2007 Oct 15

ASJC Scopus subject areas

  • Chemistry(all)
  • Materials Science(all)
  • Condensed Matter Physics

Fingerprint Dive into the research topics of 'A thermoplastic gel electrolyte for stable quasi-solid-state dye-sensitized solar cells'. Together they form a unique fingerprint.

Cite this