A design of a compact superconducting magnet for a 40 T hybrid magnet

K. Koyanagi, S. Nomura, M. Urata, M. Arata, Y. Sumiyoshi, K. Watanabe, S. Awaji, N. Kobayashi, T. Fukase, M. Motokawa

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

A superconducting magnet for a 40 T hybrid magnet was designed to be as compact as possible, and to be constructed with epoxy-impregnated layer winding using highly strengthened Nb3Sn wires. The magnet generates 16 T in a 420 mm inner diameter of windings. The total coil mass of 4.1 tons, approximately 40 % of the conventional cryostabilized magnet wound with copper-matrix wire was attained.

Original languageEnglish
Pages (from-to)431-434
Number of pages4
JournalIEEE Transactions on Applied Superconductivity
Volume7
Issue number2 PART 1
DOIs
Publication statusPublished - 1997

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'A design of a compact superconducting magnet for a 40 T hybrid magnet'. Together they form a unique fingerprint.

  • Cite this

    Koyanagi, K., Nomura, S., Urata, M., Arata, M., Sumiyoshi, Y., Watanabe, K., Awaji, S., Kobayashi, N., Fukase, T., & Motokawa, M. (1997). A design of a compact superconducting magnet for a 40 T hybrid magnet. IEEE Transactions on Applied Superconductivity, 7(2 PART 1), 431-434. https://doi.org/10.1109/77.614521