A curvature sensor using a solid polymer electrolyte

Takeshi Okuyama, Manabu Otsuki, Ryota Komiya, Nozomu Sugoh, Mami Tanaka

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

This paper describes a development of a polymer sensor using a solid polymer electrolyte (SPE) film. The sensor has a basic structure that an SPE film is sandwiched between thin carbon films, and conductive tapes are attached on each carbon film. The SPE film has a good flexibility and it is one of the most promising electroactive polymers (EAP) with capability to be used as an actuator and a sensor in air. First a displacement sensor using the SPE film was fabricated. The response to deformation was investigated. Then a curvature sensor using the SPE film is proposed. In experiments, it was found that the proposed sensor is available to measure curvature directly without complex calculations.

Original languageEnglish
Pages (from-to)823-829
Number of pages7
JournalInternational Journal of Applied Electromagnetics and Mechanics
Volume33
Issue number1-2
DOIs
Publication statusPublished - 2010

Keywords

  • Solid polymer electrolyte
  • curvature measurement
  • electroactive polymer
  • sensor

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'A curvature sensor using a solid polymer electrolyte'. Together they form a unique fingerprint.

Cite this