A calibrationless Si-CMOS 5-bit baseband phase shifter using a fixed-gain-amplifier matrix

Tuan Thanh Ta, Shoichi Tanifuji, Suguru Kameda, Noriharu Suematsu, Tadashi Takagi, Kazuo Tsubouchi

Research output: Contribution to journalArticlepeer-review

Abstract

In this paper, we propose a novel baseband (BB) phase shifter (PS) using a fixed-gain-amplifier (FGA) matrix. The proposed BB PS consists of 5 stages of a vector synthesis type FGA matrix with inphase/ quadrature-phase (I/Q) input/output interfaces. In order to achieve low gain variation between phase shift states, 3rd to 5th stages are designed to have a phase shift of +Φi and -Φi (i = 3, 4, 5). To change between +Φi and -Φi phase shift states, two FGAs with DC bias in-phase/out-phase switches are used. The two FGAs have the same gain, therefore ideally no gain variation can be achieved. Using this configuration, phase shift error and gain variation caused by process mismatch and temperature variation can be reduced. Fabricated 5-bit BB PS has 3-dB bandwidth of 1.05 GHz, root-mean-square (rms) phase errors lower than 2.2°, rms gain variations lower than 0.42 dB. Power consumption of the PS core and output buffer are 4.9mW and 14.3mW, respectively. 1-dB compression output power is -12.5 dBm. The fabricated PS shows that the total phase shift error and gain variation are within the required accuracy of a 5-bit PS with no requirement of calibration.

Original languageEnglish
Pages (from-to)1322-1329
Number of pages8
JournalIEICE Transactions on Electronics
VolumeE96-C
Issue number10
DOIs
Publication statusPublished - 2013 Oct

Keywords

  • Baseband phase shifter
  • Broadband communication
  • Millimeter wave
  • Phased array antenna

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'A calibrationless Si-CMOS 5-bit baseband phase shifter using a fixed-gain-amplifier matrix'. Together they form a unique fingerprint.

Cite this