1-bit feedforward distortion compensation technology for bandpass delta-sigma modulation

Research output: Contribution to journalArticlepeer-review

6 Citations (Scopus)

Abstract

This paper proposes 1-bit feedforward distortion compensation for digital radio frequency conversion (DRFC) with 1-bit bandpass delta-sigma modulation (BP-DSM). The 1-bit BP-DSM allows direct RF signal transmission from a digitally modulated signal. However, it has been previously reported that 1-bit digital pulse trains with non-ideal rectangle waveform cause spectrum regrowth. The proposed architecture adds a feedforward path with another 1-bit BP-DSM and so can cancel out the distortion components at any target carrier frequency. Both the main signal and the distortion compensation signal are 1-bit digital pulse trains and so no additional analog RF circuit is required for distortion compensation. Simulation results show that the proposed method holds the adjacent channel leakage ratio to 60 dB for LTE signal transmission. A prototype of the proposed 1-bit DRFC with an additional 1-bit BP-DSM in the feedforward path shows an ACLR of 50 dB, 4 dB higher than that of the conventional 1-bit DRFC.

Original languageEnglish
Pages (from-to)1087-1092
Number of pages6
JournalIEICE Transactions on Communications
VolumeE99B
Issue number5
DOIs
Publication statusPublished - 2016 May 1

Keywords

  • Bandpass
  • D/A converter
  • Delta-sigma modulator
  • Feedforward compensation

ASJC Scopus subject areas

  • Software
  • Computer Networks and Communications
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of '1-bit feedforward distortion compensation technology for bandpass delta-sigma modulation'. Together they form a unique fingerprint.

Cite this