Yuka Iga

Professor

  • Source: Scopus
  • Calculated based on no. of publications stored in Pure and citations from Scopus
20022021

Research activity per year

If you made any changes in Pure these will be visible here soon.
Filter
Conference contribution

Search results

  • 2020

    Effect of Bubble Radius on Ability of Submerged Laser Peening

    Sasaki, H., Iga, Y. & Soyama, H., 2020, Advanced Surface Enhancement - Proceedings of the 1st International Conference on Advanced Surface Enhancement INCASE 2019—Research Towards Industrialisation. Itoh, S. & Shukla, S. (eds.). Springer, p. 283-291 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • 2019

    An experimental study of influence of slits in throat position on suppression of cavitation instabilities in liquid propellant rocket inducer

    Kanamaru, M., Kamikura, Y., Kawasaki, S., Shimura, T. & Yuka, I., 2019, Fluid Applications and Systems. American Society of Mechanical Engineers (ASME), 4838. (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 3B-2019).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • In-situ measurement of liberation of a dissolved gas in unsteady cavitating flow in water

    Makii, D., Sasaki, H. & Iga, Y., 2019 Jan 1, Multiphase Flow. American Society of Mechanical Engineers (ASME), (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 5).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • 2017

    Numerical modeling of gaseous cavitation in cfd of hydraulic oil flow based on dynamic stimulation

    Matsuura, Y., Kumagai, K. & Iga, Y., 2017 Jan 1, ASME/BATH 2017 Symposium on Fluid Power and Motion Control, FPMC 2017. American Society of Mechanical Engineers, (ASME/BATH 2017 Symposium on Fluid Power and Motion Control, FPMC 2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2014

    Thermodynamic effect on cavitation in high temperature water

    Yamaguchi, Y. & Iga, Y., 2014 Jan 1, Fora: Cavitation and Multiphase Flow; Fluid Measurements and Instrumentation; Microfluidics; Multiphase Flows: Work in Progress; Fluid-Particle Interactions in Turbulence. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    12 Citations (Scopus)
  • 2013

    Study of supersonic micro-channel for cooling electronic devices

    Takahashi, Y., Okajima, J., Iga, Y., Komiya, A., Fu, W. S. & Maruyama, S., 2013, ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013. V001T05A003. (ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)
  • 2011

    Numerical analysis of influence of pipe length on cavitation surge

    Iga, Y., Nishitanaka, H. & Yoshiki, Y., 2011 Dec 1, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 351-357 7 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • On boundary conditions for cavitation CFD and system dynamics of closed loop channel

    Nohmi, M., Ikohagi, T. & Iga, Y., 2011 Dec 1, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. p. 183-190 8 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)
  • 2010

    A detailed observation of hydrofoil cavitation and a proposal for improving cavitation model

    Nohmi, M., Ochiai, N., Iga, Y. & Ikohagi, T., 2010 Dec 1, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010. p. 19-27 9 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • 2009

    A study of progpagating speed of rotating cavitation based on numerical analysis

    Iga, Y. & Yoshida, Y., 2009 Dec 1, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART A ed. p. 399-405 7 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 1, no. PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)
  • Numerical prediction method of cavitation erosion

    Nohmi, M., Ikohagi, T. & Iga, Y., 2009 Sep 21, 2008 Proceedings of the ASME Fluids Engineering Division Summer Conference, FEDSM 2008. PART B ed. Vol. 1. p. 1139-1145 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    19 Citations (Scopus)
  • Thermodynamic effect on sub-synchronous rotating cavitation and surge mode oscillation in a space inducer

    Yoshida, Y., Nanri, H., Kikuta, K., Kazami, Y., Iga, Y. & Ikohagi, T., 2009 Dec 1, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART A ed. p. 121-129 9 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 1, no. PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)
  • 2007

    Thermodynamic effect on rotating cavitation in an inducer

    Yoshida, Y., Watanabe, M., Iga, Y., Sasao, Y., Hashimoto, T. & Ikohagi, T., 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART A ed. p. 423-429 7 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)
  • 2006

    Numerical analysis about suppression effect of tandem cascade on cavitation instabilities

    Hiranuma, M., Iga, Y., Yoshida, Y. & Ikohagi, T., 2006 Dec 1, Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11. Vol. 1. p. 64-70 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2005

    Numerical study of cavitation instabilities arising in cascade with slit

    Iga, Y., Shimura, T., Hiranuma, M. & Ikohagi, T., 2005 Dec 1, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 1412-1418 7 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Numerical study of cavitation instabilities arising in cascade with slit

    Iga, Y., Shimura, T., Hiranuma, M. & Ikohagi, T., 2005 Dec 19, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Symposia, FEDSM2005. p. 1265-1271 7 p. FEDSM2005-77299. (Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference; vol. 1 PART B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2003

    Experimental and numerical study of cavitation breakdown in a centrifugal pump

    Nohmi, M., Iga, Y., Goto, A. & Ikohagi, T., 2003 Dec 1, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 2, Part B, Symposia. Ogut, A., Tsuji, Y., Kawahashi, M., Ogut, A., Tsuji, Y. & Kawahashi, M. (eds.). p. 1251-1258 8 p. (Proceedings of the ASME/JSME Joint Fluids Engineering Conference; vol. 2 B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)