Research Output

Filter
Paper
2020

Adsorption and separation of Sr(II) and Y(III) by extration chromatography using DTBuch18C6-impregnated adsorbent

Kim, S. Y., Kawamura, T. & Ito, T., 2020 Jan 1, p. 481-488. 8 p.

Research output: Contribution to conferencePaper

Basic study on the anisotropy of sand by using hollow cylindrical torsional shear apparatus

Yamada, S. & Nakano, M., 2020.

Research output: Contribution to conferencePaper

Comparison of fatigue crack growth rate of aged CrMo steel in superheated steam and air environments

Takeda, Y., Ozawa, Y., Ismail, N. F. & Nakano, S., 2020 Jan 1, p. 1101-1105. 5 p.

Research output: Contribution to conferencePaper

Crack path and oxidation behavior during crack growth of alloy 617 in steam environment at 750 °C

Araki, K., Yoshida, M., Ozawa, Y., Takeda, Y. & Nakano, S., 2020, p. 1096-1100. 5 p.

Research output: Contribution to conferencePaper

Cut slope damage of expressway caused by heavy rainfall in Tohoku district, Japan

Haga, N., Kazama, M., Kamura, A., Nagao, K., Usami, M. & Sawano, K., 2020.

Research output: Contribution to conferencePaper

Studies on separation of platinum group metals from high-level liquid waste using sulfur-containing amide compounds fixed adsorbents

Ito, T., Osawa, N., Oosugi, H. & Kim, S. Y., 2020 Jan 1, p. 474-480. 7 p.

Research output: Contribution to conferencePaper

The influence of the particle shape of falling rock-mass on the maximum travel distance

Kawai, T., Yoshii, T., Kim, J. & Kazama, M., 2020.

Research output: Contribution to conferencePaper

2019

Catalytic technology for production of C4 chemicals via erythritol from biomass

Tomishige, K., 2019, p. 44-54. 11 p.

Research output: Contribution to conferencePaper

Effects of gamma ray irradiation on corrosion of carbon steel at water line

Ariga, T., Abe, H. & Watanabe, Y., 2019 Jan 1, p. 960-966. 7 p.

Research output: Contribution to conferencePaper

Fundamental properties of mortar using cement clinker as fine aggregate

Miyamoto, S., Minagawa, H. & Hisada, M., 2019, p. 3217-3228. 12 p.

Research output: Contribution to conferencePaper

Hydrogen assisted oxidation behavior of alloy 600 in high temperature air environment by in-situ H charging method

Wang, Z. & Takeda, Y., 2019 Jan 1, p. 1304-1310. 7 p.

Research output: Contribution to conferencePaper

In-situ acoustic emission monitoring in mines

Manthei, G., Plenkers, K., Philipp, J., Naoi, M., Moriya, H. & Nakatani, M., 2019 Jan 1.

Research output: Contribution to conferencePaper

Low SNR seismicity detection using features of 3D particle motions of direct P-waves

Mukuhira, Y., Poliannikov, O. V., Fehler, M. C. & Moriya, H., 2019 Jan 1, p. 2882-2886. 5 p.

Research output: Contribution to conferencePaper

Seismic performance of isolated bridges considering long-term deterioration of isolators

Matsuzaki, H., Kubo, Y., Oikawa, M. & Unjoh, S., 2019 Jan 1.

Research output: Contribution to conferencePaper

2018

Periodical shedding of cavitation cloud induced by a cavitating jet

Kamisaka, H. & Soyama, H., 2018 Jan 1, p. 111-123. 13 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)
2017

A confocal microscope with a mode-locked laser source

Shimizu, Y., Nakamura, T., Chen, Y. & Ko, I., 2017 Nov 13.

Research output: Contribution to conferencePaper

An experimental study of sand boiling in relation to shearing characteristics of liquefied soil

Kawai, T., Kim, J., Kazama, M. & Yoshii, T., 2017 Jan 1, p. 1537-1540. 4 p.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Catalytic copolymerization of CO2 and diols using CeO2 and 2-cyanopyridine

Tomishige, K., 2017 Jan 1, p. 58-68. 11 p.

Research output: Contribution to conferencePaper

Design and verification of an XYZ three-axis micro stage

Adachi, K., Sugawara, T., Shimizu, Y., Chen, Y. L., Gao, W., Niwa, E. & Sasaki, Y., 2017 Nov 13.

Research output: Contribution to conferencePaper

Detection of hydrogen permeating through steel using tungsten oxide thin film

Sugawara, Y., Sakaizawa, Y., Shibata, A., Muto, I. & Hara, N., 2017.

Research output: Contribution to conferencePaper

Effect of three-dimensional ultrasonic assistance on milling process

Shimada, K., Iwadate, R., Mizutani, M. & Kuriyagawa, T., 2017 Nov 13.

Research output: Contribution to conferencePaper

Effects of water injection on generator output power augmentation in a microturbine

Suzuki, K., Nakano, S., Seki, K., Takeda, Y. & Kishibe, T., 2017.

Research output: Contribution to conferencePaper

Evaluation of grating periods by using pulsed laser source

Uehara, K., Shimizu, Y., Chen, Y. & Ko, I., 2017 Nov 13.

Research output: Contribution to conferencePaper

Evaluation of relative vertical error motions of a bench center by using an optical micrometer

Niu, Z., Chen, Y., Shimizu, Y. & Ko, I., 2017 Nov 13.

Research output: Contribution to conferencePaper

Fabrication of a two-dimensional diffraction grating by a two-axis Lloyd's mirror interferometer

Mano, K., Aihara, R., Shimizu, Y., Chen, Y. & Ko, I., 2017 Nov 13.

Research output: Contribution to conferencePaper

Feasibility study for a virtuous material cycle in Indonesia - A cooperation between Tohoku University and the Institute of Technology Bandung

Furukawa, R., Komori, D., Fukushima, Y., Grause, G., Yoshioka, T., Chaerul, M., Sembiring, E., Damanhuri, E., Kardhana, H., Farid, M., Ariesyady, H. D. & Fujioka, Y., 2017 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)
3 Citations (Scopus)

OPTIMIZATION OF IN-CORE FUEL MANAGEMENT, CYCLE PERIOD AND POWER SCHEDULING OF NUCLEAR POWER PLANTS BY LARGE SCALE NONLINEAR PROGRAMMING.

Hoshino, T., Takahashi, M. & Fujii, Y., 2017 Jan 1, p. 115-134. 20 p.

Research output: Contribution to conferencePaper

Polarization ray-tracing model for orthogonal two-axis Lloyd's mirror interference lithography

Chen, X., Ren, Z., Chen, Y., Shimizu, Y. & Gao, W., 2017 Nov 13.

Research output: Contribution to conferencePaper

Surface form measurement of a small roll workpiece

Saito, T., Machida, Y., Shimizu, Y., Chen, Y. L. & Gao, W., 2017 Nov 13.

Research output: Contribution to conferencePaper

Ultra-precision angle sensor with a mode-locked laser source

Madokoro, S., Shimizu, Y., Chen, Y. & Ko, I., 2017 Nov 13.

Research output: Contribution to conferencePaper

2016

Selective reduction of TiO2-SiO2 in the carbothermal reduction of titanium raw materials for preparation of titanium oxycarbide

Xiao, J., Jiang, B., Huang, K., Jiao, S. & Zhu, H., 2016 Jan 1, p. 419-425. 7 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

User interface model for microgrid systems monitoring: From user needs to design requirements

Chien, S. C., Fujiyama, M., Ishida, T., Wei, F., Shwe, H. Y. & Tseng, K. J., 2016 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)
2015

A fundamental study on breakup patterns of water film splashed into air flows

Matsuzaki, Y., Nakano, S., Takeda, Y. & Satou, K., 2015 Jan 1.

Research output: Contribution to conferencePaper

Analysis of food production and energy nexus through a model proposed for multifunctional farms considering land use efficiency

Balda, M. C., Furubayashi, T. & Nakata, T., 2015 Jan 1.

Research output: Contribution to conferencePaper

Analysis of the introduction of biofuel from rice in Japan using a computable general equilibrium model

Villatoro, H., Furubayashi, T. & Nakata, T., 2015 Jan 1.

Research output: Contribution to conferencePaper

Atomistic simulation of yield and plastic deformation in bulk nanostructured metals

Tsuru, T., Aoyagi, Y., Kaji, Y. & Shimokawa, T., 2015 Jan 1.

Research output: Contribution to conferencePaper

Consideration on evaluation of seismic slope stability based on shaking table model test

Nakajima, S., Watanabe, K., Shinoda, M., Abei, K., Nakamura, S., Kawai, T. & Nakamura, H., 2015 Jan 1, p. 957-962. 6 p.

Research output: Contribution to conferencePaper

Open Access
4 Citations (Scopus)

Design of woody biomass supply chain for co-firing considering characteristics of bio-fuel

Furubayashi, T. & Nakata, T., 2015 Jan 1.

Research output: Contribution to conferencePaper

Determination of the origin position for an angle sensor with a femtosecond laser

Tamada, J., Kudo, Y., Chen, Y., Shimizu, Y., Ito, S. & Ko, I., 2015 Oct 18.

Research output: Contribution to conferencePaper

Ductile cutting of a microstructure array on silicon surface by using a diamond tool with a negative rake angle

Chen, Y., Cai, Y., Tohyama, K., Shimizu, Y., Ito, S. & Ko, I., 2015 Oct 18.

Research output: Contribution to conferencePaper

Effect of boiling phenomena on the corrosion of austenitic stainless steel (R-SUS304ULC) in nitric acid solution containing chromium ions

Hasegawa, S., Ebina, T., Tokuda, H., Hitomi, K., Ishii, K. & Kimu, S., 2015 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Effects of supersaturated silicic acid concentration on deposition rate around geological disposal system

Sasagawa, T., Chida, T., Niibori, Y. & Mimura, H., 2015 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Fabrication and control of fine periodic surface structures by short pulsed laser

Kodama, S., Shibata, A., Suzuki, S., Shimada, K., Mizutani, M. & Kuriyagawa, T., 2015 Oct 18.

Research output: Contribution to conferencePaper

Influence of workpiece materials on the characteristics of the layers by electrical discharge coating

Sumi, N., Kato, C., Mizutani, M. & Kuriyagawa, T., 2015 Oct 18.

Research output: Contribution to conferencePaper

Investigations on longitudinal cracks of Ti-bearing high strength medium carbon steel by CSP process

Miki, T. & Kaneko, S., 2015 Jan 1, p. 934-935. 2 p.

Research output: Contribution to conferencePaper

Laser interference lithography with a modified two-axis Lloyd's mirror interferometer for fabrication of two-dimensional micro patterns

Cai, Y., Li, X., Aihara, R., Shimizu, Y., Ito, S. & Ko, I., 2015 Oct 18.

Research output: Contribution to conferencePaper

1 Citation (Scopus)