ENG - Aerospace Engineering

Research Output

Filter
Article
2020

Active flow control using plasma actuators in a reduced pressure environment

Komuro, A., Sato, K., Maruyama, Y., Takashima, K., Nonomura, T., Kaneko, T., Ando, A. & Asai, K., 2020 Jan 1, In : Journal of Physics D: Applied Physics. 53, 7, 07LT01.

Research output: Contribution to journalArticle

Aerodynamics of owl-like wing model at low reynolds numbers

Aono, H., Kondo, K., Nonomura, T., Anyoji, M., Oyama, A., Fujii, K. & Yamamoto, M., 2020, In : Transactions of the Japan Society for Aeronautical and Space Sciences. 63, 1, p. 8-17 10 p.

Research output: Contribution to journalArticle

Open Access

Characteristic evaluation of chameleon luminophore dispersed in polymer

Kasai, M., Sugioka, Y., Yamamoto, M., Nagata, T., Nonomura, T., Asai, K. & Hasegawa, Y., 2020 May 1, In : Sensors (Switzerland). 20, 9, 2623.

Research output: Contribution to journalArticle

Open Access

Commercial Uncooled Microbolometer Camera Applied to 50-kg Class Satellite

Fukuhara, T., Sakamoto, Y., Kuwahara, T., Sugimura, N., Yoshida, K. & Takahashi, Y., 2020 Feb, In : IEEE Geoscience and Remote Sensing Letters. 17, 2, p. 332-336 5 p., 8736017.

Research output: Contribution to journalArticle

Cross-Plane and In-Plane Heat Conductions in Layer-by-Layer Membrane: Molecular Dynamics Study

Kawagoe, Y., Surblys, D., Matsubara, H., Kikugawa, G. & Ohara, T., 2020 Jun 16, In : Langmuir. 36, 23, p. 6482-6493 12 p.

Research output: Contribution to journalArticle

Open Access

Damage of twisted tape tethers on debris collision

Uwamino, Y., Fujiwara, M., Tomizaki, H., Otani, K. & Makihara, K., 2020 Mar, In : International Journal of Impact Engineering. 137, 103440.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Data-Driven Vector-Measurement-Sensor Selection Based on Greedy Algorithm

Saito, Y., Nonomura, T., Nankai, K., Yamada, K., Asai, K., Sasaki, Y. & Tsubakino, D., 2020 Jul, In : IEEE Sensors Letters. 4, 7, 9105114.

Research output: Contribution to journalArticle

Dynamic characteristics of spindle with water-lubricated hydrostatic bearings for ultra-precision machine tools

Fedorynenko, D., Kirigaya, R. & Nakao, Y., 2020 May, In : Precision Engineering. 63, p. 187-196 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Dynamic stall control around practical airfoil using nanosecond-pulse-driven dielectric barrier discharge plasma actuators

Iwasaki, Y., Nonomura, T., Nankai, K., Asai, K., Kanno, S., Suzuki, K., Komuro, A., Ando, A., Takashima, K., Kaneko, T., Yasuda, H., Hayama, K., Tsujiuchi, T., Nakajima, T. & Nakakita, K., 2020 Mar 2, In : Energies. 16, 3, 1376.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Effect of flux evaluation methods on the resolution and robustness of the two-step finite-difference weno scheme

Kamiya, T., Asahara, M. & Nonomura, T., 2020 Nov, In : Numerical Mathematics. 13, 4, p. 1068-1097 30 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Effects of high-temperature thermal annealing on properties of aligned multi-walled carbon nanotube sheets and their composites

Huu Nam, T., Goto, K., Shimamura, Y., Inoue, Y., Yamamoto, G., Shirasu, K. & Hashida, T., 2020 Jun 2, In : Composite Interfaces. 27, 6, p. 569-586 18 p.

Research output: Contribution to journalArticle

Open Access

Evaluating the applicability of a phase-averaged processing of skin-friction field measurement using an optical flow method

Lee, C., Lee, T., Nonomura, T. & Asai, K., 2020 Oct 1, In : Journal of Visualization. 23, 5, p. 773-782 10 p.

Research output: Contribution to journalArticle

Evaluation of the in-situ damage and strength properties of thin-ply CFRP laminates by micro-scale finite element analysis

Higuchi, R., Aoki, R., Yokozeki, T. & Okabe, T., 2020 Sep 2, In : Advanced Composite Materials. 29, 5, p. 475-493 19 p.

Research output: Contribution to journalArticle

Experimental and numerical investigations on push-out delamination in drilling of composite laminates

Higuchi, R., Warabi, S., Ishibashi, W. & Okabe, T., 2020 Sep 29, In : Composites Science and Technology. 198, 108238.

Research output: Contribution to journalArticle

Experimental Investigation of the Continuous Transition of Flame-Spreading near the Blow-Off Limit

Komizu, K., Saito, Y., Tsuji, A. & Nagata, H., 2020 Jan 1, In : Journal of Combustion. 2020, 3187694.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Experimental investigation of transonic and supersonic flow over a sphere for Reynolds numbers of 103–105 by free-flight tests with schlieren visualization

Nagata, T., Noguchi, A., Nonomura, T., Otani, K. & Asai, K., 2020 Mar 1, In : Shock Waves. 30, 2, p. 139-151 13 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Experimental investigation on compressible flow over a circular cylinder at Reynolds number of between 1000 and 5000

Nagata, T., Noguchi, A., Kusama, K., Nonomura, T., Komuro, A., Ando, A. & Asai, K., 2020, In : Journal of Fluid Mechanics. 893, A13.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Gate optimization for resin transfer molding in dual-scale porous media: Numerical simulation and experiment measurement

Oya, Y., Matsumiya, T., Ito, A., Matsuzaki, R. & Okabe, T., 2020 Jul 1, In : Journal of Composite Materials. 54, 16, p. 2131-2145 15 p.

Research output: Contribution to journalArticle

Investigation of graphite nozzle erosion in hybrid rockets using oxygen/high-density polyethylene

Kamps, L., Hirai, S., Sakurai, K., Viscor, T., Saito, Y., Guan, R., Isochi, H., Adachi, N., Itoh, M. & Nagata, H., 2020, In : Journal of Propulsion and Power. 36, 3, p. 423-434 12 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Liquid-Phase Assisted Engineering of Highly Strong SiC Composite Reinforced by Multiwalled Carbon Nanotubes

Fan, Y., Song, E., Mustafa, T., Liu, R., Qiu, P., Zhou, W., Zhou, Z., Kawasaki, A., Shirasu, K., Hashida, T., Liu, J., Wang, L., Jiang, W. & Luo, W., 2020, (Accepted/In press) In : Advanced Science.

Research output: Contribution to journalArticle

Open Access

Microstructure-elastic property relationships in carbon fibers: A nanoindentation study

Shirasu, K., Goto, K. & Naito, K., 2020 Nov 1, In : Composites Part B: Engineering. 200, 108342.

Research output: Contribution to journalArticle

Multiscale analysis and experimental validation of crack initiation in quasi-isotropic laminates

Kumagai, Y., Onodera, S., Salviato, M. & Okabe, T., 2020 Jun 1, In : International Journal of Solids and Structures. 193-194, p. 172-191 20 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Neutrino Transport with Monte Carlo Method. I. Toward Fully Consistent Implementation of Nucleon Recoils in Core-collapse Supernova Simulations

Kato, C., Nagakura, H., Hori, Y. & Yamada, S., 2020 Jul 1, In : Astrophysical Journal. 897, 1, 43.

Research output: Contribution to journalArticle

Numerical investigation on gas production from Shenhu (China): Influence of layer inclination and horizontal inhomogeneities

Chen, L., Feng, Y., Merey, S., Lijith, K. P., Singh, D. N., Komiya, A. & Maruyama, S., 2020 Oct, In : Journal of Natural Gas Science and Engineering. 82, 103509.

Research output: Contribution to journalArticle

Optimum pressure range evaluation toward aerodynamic measurements using PSP in low-pressure conditions

Nagata, T., Kasai, M., Okudera, T., Sato, H., Nonomura, T. & Asai, K., 2020 Aug, In : Measurement Science and Technology. 31, 8, 085303.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Phonon transport probed at carbon nanotube yarn/sheet boundaries by ultrafast structural dynamics

Hada, M., Makino, K., Inoue, H., Hasegawa, T., Masuda, H., Suzuki, H., Shirasu, K., Nakagawa, T., Seki, T., Matsuo, J., Nishikawa, T., Yamashita, Y., Koshihara, S. Y., Stolojan, V., Silva, S. R. P., Fujita, J. I., Hayashi, Y., Maeda, S. & Hase, M., 2020 Dec, In : Carbon. 170, p. 165-173 9 p.

Research output: Contribution to journalArticle

Predictive Switching Vibration Control Based on Harmonic Input Formulation

Takamoto, I., Abe, M., Hara, Y., Nakahara, T., Otsuka, K. & Makihara, K., 2020 Nov 1, In : Sensors and Actuators, A: Physical. 315, 112271.

Research output: Contribution to journalArticle

Self-sensing state estimation of switch-controlled energy harvesters

Hara, Y., Yamamoto, Y. & Makihara, K., 2020, (Accepted/In press) In : Journal of Intelligent Material Systems and Structures. 31, 20, p. 2326-2341 16 p.

Research output: Contribution to journalArticle

Separated flow control of small horizontal-axis wind turbine blades using dielectric barrier discharge plasma actuators

Aono, H., Fukumoto, H., Abe, Y., Sato, M., Nonomura, T. & Fujii, K., 2020 Mar 1, In : Energies. 13, 5, 1218.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Shape effects of wheel grousers on traction performance on sandy terrain

Nagaoka, K., Sawada, K. & Yoshida, K., 2020 Aug, In : Journal of Terramechanics. 90, p. 23-30 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Single-pixel resolution velocity/convection velocity field of a supersonic jet measured by particle/schlieren image velocimetry

Ozawa, Y., Ibuki, T., Nonomura, T., Suzuki, K., Komuro, A., Ando, A. & Asai, K., 2020 Jun 1, In : Experiments in Fluids. 61, 6, 129.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Soil flow analysis for grouser wheels based on a particle image velocimetry method

Nakamura, H., Nagaoka, K. & Yoshida, K., 2020 Oct, In : Journal of Terramechanics. 91, p. 233-241 9 p.

Research output: Contribution to journalArticle

Stabilized combustion of circular fuel duct with liquid oxygen

Tsuji, A., Saito, Y., Kamps, L., Wakita, M. & Nagata, H., 2020, (Accepted/In press) In : Proceedings of the Combustion Institute.

Research output: Contribution to journalArticle

Structure-Property Correlation Study for Organic Photovoltaic Polymer Materials Using Data Science Approach

Huang, Y., Zhang, J., Jiang, E. S., Oya, Y., Saeki, A., Kikugawa, G., Okabe, T., Okabe, T., Ohuchi, F. S. & Ohuchi, F. S., 2020 Jun 18, In : Journal of Physical Chemistry C. 124, 24, p. 12871-12882 12 p.

Research output: Contribution to journalArticle

Turbulence Modeling for Turbulent Boundary Layers at Supercritical Pressure: A Model for Turbulent Mass Flux

Kawai, S. & Oikawa, Y., 2020 Mar 1, In : Flow, Turbulence and Combustion. 104, 2-3, p. 625-641 17 p.

Research output: Contribution to journalArticle

Unified mechanisms for separation control around airfoil using plasma actuator with burst actuation over Reynolds number range of 103-106

Sato, M., Okada, K., Asada, K., Aono, H., Nonomura, T. & Fujii, K., 2020 Feb 1, In : Physics of Fluids. 32, 2, 025102.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Unsteady skin-friction field estimation based on global luminescent oil-film image analysis

Lee, T., Lee, C., Nonomura, T. & Asai, K., 2020 Oct 1, In : Journal of Visualization. 23, 5, p. 763-772 10 p.

Research output: Contribution to journalArticle

Unveiling the Working Mechanism of Graphene Bubble Film/Silicon Composite Anodes in Li-Ion Batteries: From Experiment to Modeling

Wasalathilake, K. C., Hapuarachchi, S. N. S., Zhao, Y., Fernando, J. F. S., Chen, H., Nerkar, J. Y., Golberg, D., Zhang, S. & Yan, C., 2020 Jan 27, In : ACS Applied Energy Materials. 3, 1, p. 521-531 11 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)
2019

Absolute nodal coordinate beam element for modeling flexible and deployable aerospace structures

Otsuka, K. & Makihara, K., 2019 Jan 1, In : AIAA journal. 57, 3, p. 1343-1346 4 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

A multiscale model for the synthesis of thermosetting resins: From the addition reaction to cross-linked network formation

Li, J., Jumpei, S., Waizumi, H., Oya, Y., Huang, Y., Kishimoto, N. & Okabe, T., 2019 Apr, In : Chemical Physics Letters. 720, p. 64-69 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
4 Citations (Scopus)